Mar 11, 2009

A possible way forward.

Last week I had ordered some 11x17 Laser Transparency Film. Today it arrived. My plan is to print out the face plate text and dials onto the film and laminate it onto the backside of the Lexan Face Plates. Then paint the back of the film with gold metallic paint. I'll try that out tomorrow after I head to Kinko's to print out the face plates on the film.

Tonight I was able to get most of the front panel components wired to the turret board.
Here's the front panel controls.
Left to Right
Trem Tone, Trem Volume, Trem Inputs, Tone, Volume, Inputs


Here is the other part of the front panel with the Trem Speed, Trem Intensity, Trem Tone and Trem Volume controls. I was also able to finish mounting all of the components to the turret board. The Sprauge Atom Cap came in, and I yanked the two 8.2k resistors and put the far better Riken Ohm (http://angela.com/rikenohmresistors.aspx) ones in their place. They are the two blue ones with the gold leads. just to the right of that big Blue Capacitor.



No comments:

Post a Comment